◆ AddressingMode
| uint32_t I2C_InitTypeDef::AddressingMode |
Specifies if 7-bit or 10-bit addressing mode is selected. This parameter can be a value of I2C Addressing Mode
◆ ClockSpeed
| uint32_t I2C_InitTypeDef::ClockSpeed |
Specifies the clock frequency. This parameter must be set to a value lower than 400kHz
◆ GeneralCallMode
| uint32_t I2C_InitTypeDef::GeneralCallMode |
◆ OwnAddress1
| uint32_t I2C_InitTypeDef::OwnAddress1 |
Specifies the first device own address. This parameter can be a 7-bit or 10-bit address.
◆ Timing
| uint32_t I2C_InitTypeDef::Timing |
Specifies the I2C_TIMINGR_register value. This parameter calculated by referring to I2C initialization section in Reference manual
The documentation for this struct was generated from the following file:
- drivers/include/bf0_hal_i2c.h
